You may want to consider spicing things up a little, however if you don’t have the right sex toys then this article will show you what to do next. We'll let you know how in this article with its step-by-step instructions on making your own fleshlight. Goodbye boredom!
Before we begin, we should like to remind you that the information in this article is purely for fun and should not be taken too seriously. We support safe and responsible sexual practices. Now, let the games begin!
1. Potato chip canister, sponge, latex glove
You will need a potato chip canister, a sponge, and a rubber glove for this method. Here's how you do it:
• Put the latex glove in the potato chip canister with the fingers pointing in.
• Put the sponge inside the glove and wedge one end up against a wall so that it stays there.
If you add some hot or cold water (whichever you prefer) and perhaps a lubricant like soap or shower gel to make it glide easier across you skin, your own home-made flesh light can be so much more comfortable.
2. Tall glass, two sponges, plastic glove
This method requires a large glass, two sponges, and a plastic glove. Here's how you do it:
• Put one sponge into the bottom of the glass.
• Put the second sponge inside the plastic glove.
• With a sponge in it, this hand then goes up on top of the first sponge around 8 inches from the top of the glass and just below where you would grasp your drink (see photo above).
3. Tape, rubber band, cucumber
Something that feels more like the real thing is this homemade fleshlight made by using a cucumber. This is how you do it:
• Cut off an end of the cucumber to make a hole.
• Carefully remove the flesh from inside until there is just a 2 cm thick wall.
• Guerilla tape is used to add texture.
• The tape is held in place with rubber bands.
You could also, for example, try this with a banana.
Other supplies: a condom, a plastic bottle, and cotton balls.
To start, you will need a plastic container, cotton balls, and a condom.
This is how to make it:
• Put a handful of cotton balls in the plastic bottle.
• Put a condom over the mouth of the bottle.
You can use a PVC pipe to customise your lantern.
This is how to make it:
• Load the PVC pipe with cotton.
• Put a condom on the end of the pipe and knot it.
You can use a KFC bucket to make it bigger and more real.
This is how to make it:
• Cut a hole in the bottom of the KFC bucket.
• Take a roll of toilet paper and fit it into the bucket and stops. Then use the tape to hold the rest of the toilet paper rolls.
• Use strips of tape there to stick a plastic glove over the hole.
You can use a sock to make your fleshlight softer and more flexible.
This is how to make it:
• Put a sock in a plastic glove and roll it up.
• Use a rubber band to hold the glove and sock together.
• For added comfort, put a towel over the glove.
Cornstarch and water in a cup
You may try making your very own simple and easy DIY fleshlight by using cornstarch and water. Here's how to do it:
• Stir together in a cup the cornstarch and water until it becomes a thick uniform paste.
•Mash the mixture into a plastic bag.
• Put the bag into a cup, hold and fix it. And then you get the kind of shape fleshlight you want.
You may change your DIY fleshlight's texture and hardness with the process that follows; If desired try mixing differing ratios of cornstarch and water until it feels right in your hand.
Now that you know how to make your own fleshlights, You may wish to make them any time you feel like it. We, however, hope that you will always place your first priority on safety and health. If you can, consider buying a pocket pussy designed by manufacturers for a cleaner and safer experience.
